Robert Collett is also available to help with selling machines directly from site. These machines might no longer be required due to replacement, factory clearance or other reasons.
Robert is currently helping with the sale of the following items.
These machines are all second hand and are being sold as seen - see Used Machine Terms
Verville four station baler (2000)
Type is VP-400SE has been baling 20kg of Woodshavings at rates 180 to 240 bags an hour. The machine comes with refurbished tubes, feeder coffin, heat sealer, auto bag placer and dust extraction.
United Packaging Reel wrapper (1996) also known as Cocoon wrapper
Formerly this machine was wrapping insulation packs. It can Cocoon cylindrical objects reels of paper or plastic or pallets up to 4ft x 5 ft. (1220 x 1525 mm). It has a weighing facility and is situated in Co. Kilkenny, Ireland
2 Printheads, for any porous surface as paper or cardboard range of inks :Black, Red, Blue, Green. provides the flexibility of printing bar codes, logos and other text. Tested and working last month.
auto sack filling line with bag flattening & robot palletizing, (2001)
This line has been re furbished and formerly packed decorative wood chip at circa 5 bags a minute. If needed it can fill bags up to 120 litre size. Line can be seen running.
PE bags hand placed on clamp. Bag weigher could weigh out wood chip at 5 bags a minute. Filled sacks are carried upright on small sack conveyor to heat sealer (sealer not included but can be sourced).
This Paxman Diesel Engine Type 12YHC MK6, No 720029/7 came out off a British Royal Navy Submarine. The Dale Electric Generator can generate 605 KW of power at 1500 RPM VOLT 415/240. AMPS 1053. 3 Phase. This generator has been recently serviced. Includes radiator cooling fan but will need removing from Factory where it has been little used as backup power supply.
Has been producing small woodshavings packs between 900 to 1200 grams circa 152mm wide x 120mm high x 203mm long. Baler comes with hydraulic pack and motor believed to be 11kw hence can produce 2 or 3 bales a minute dependant of substrate. Bales taped sealed closed by hand.
Has been producing Hay and Straw Pet packs between 900 to 1200 grams circa 152mm wide x 120mm high x 203mm long. Baler comes with hydraulic pack and motor believed to be 11kw hence can produce 2 or 3 bales a minute dependant of substrate. Bales taped sealed closed by hand.
90 Litre semi automatic wood shavings hay and straw baler
Capable of producing circa 2 bales a minute. Includes baler, hydraulic pack. Bale size 330 mm face x 140mm high x 508mm long. Bales taped sealed closed by hand.
I guess 6 or 8 cubic metre capacity. These mixers are used for making straw based diets or as a straw buffer hopper to keep chopped straw moving prior to a baler.
Ken Mills Engineering Hay /Straw or Haylage 25 kg baling system (circa 2003)
This fully automatic baling system takes big bales on to its walking floor (5.4m long); the material is next sent through a bale breaker. The fluffed fibre is moved onto a conveyor, then weigh chamber and into a 3 ram baler. On the exit Shute the bales are manually sealed.
Ken Mills Engineering Hay /Straw or Haylage 25 kg baling system (circa 2003)
Continued from rc222a bale size: 400mm face x 250mm full side gusset x 600mm long. Packing rate circa 60 bales an hour (subject to material). 3 phase electric, main baler motor 15kw, haylage baler 63 amps, bale breaker 32 amps.
C. F. Nielsen BP 3200 automatic Briquetter circa 2009
This Briquetter has been making 60mm wood briquettes. The BP 3200 automatic can run at 400 to 600kg rate an hour dependant on substrate. The machines have worked well and only been removed as 70mm Briquettes now being produced. Machine comes with 20 metres of cooling line.
See video link: https://www.dropbox.com/sh/adfcr8zq76tcj8i/AABvFwZbjf-rHN-51M4Qmmrga?dl=0
I guess this peat hammer mill is from 1980's when it was used to make peat block substrate. Believed to be powered by 60kw motor it comes with screens.
This small format baler is a simple design where product is loaded in top, compression ram presses bale straight out to exit chamber. The exit chamber has a hinged top that is spring loaded, so it can be tighten so I presume either 15kg or possibly 20kg of wood shavings can be baled. It is manually operated with single bags be filled and hand sealed.
This LMS baler was made circa 1992 before Challenger took over the company. is 3 phase and powered by 22kw power pack. Makes 20 kg wood shavings bales and circa 60 a hour. It has hopper and beneath that a ram that feeds a baling chamber which is set at 90 degrees. The exit chamber feeds the bag shoot which has a cut out as photograph, from which bale of shavings is taken and manually sealed.
Premier tech VP 400 SE CCW four station baler (Feb 2009)
This picture was taken summer 2015 when packing wood chip bales circa size 420mm face width + 320mm full side gusset pressed 700mm long giving circa 25kg for the equine bedding market. The equipment is in good condition and still wired up. Bag specification used = 420mm x 737mm x 1050mm x 120mu SEE VIDEO https://www.youtube.com/watch?v=VDhwnY5iS2g
Premier tech VP 400 SE CCW four station baler (Feb 2009)
The four station baler is pictured has hydraulic pack, control panel, 4 station rotary carousel including 4 x tubes and opening boxes infeed and safety fencing. The machine has auto bag placing , auto bag removal arm, off take conveyor. Power 400V 3Ph 50 Hz, +-10% voltage fluctuation max. Compressed air:100 psi (7 bars), clean dry air
This large feed hopper was used to bulk store the milled wood chip. It has 3 large screw augers which feed the compression shoots via a Cross feed auger.
These two Bale Pak pet balers were making small wood shavings packs 25cm x 14 cm x 7 cm or 10 x 5.5 x 3 inch. The shoots are manually loaded for circa 2 or 3 bales a minute. Small bales removed and taped close. I guess power pack 11kw
This big bale press has been compressing 3.5 to 4 m3 of compost on a pallet 1200 x 1000 and stretch wrapping it at a rate of 14 pallets and hour. Filled height circa 1500mm subject to substrate. Full pallet weight circa 1500 to 2000kg.
The foot print for this machine is 3000 x 3000mm frame with 1050mm pallet track 2200 before and 5100mm after to take pressed pallets prior to wracking. Parts still available.
STS model STE03-M06. This electric pedestrian powered trolley with hydraulics was used to turn 60kg rolls of plastic and paper packaging film, 410 diameter, through 180 degrees see short video https://youtu.be/ampXTgTyCWY
This unit is a battery hydraulic mini stacker with manual roll clamp and manual sideways roll rotation. Technical Specifications
Battery hydraulic mini stacker
Manual roll clamp
Manual sideways roll rotation
SWL 60 kilos
Max roll diameter 410mm
It is designed to lift and rotate rolls of various sizes in a confined space. The roll is clamped between the rubber lined pads by a hydraulic constant tension system. This allows the unit to pick up rolls of material that tend to telescope. The pressure of the clamp can be set so that the roll is gripped the same each time. The roll is lifted by pressing a button on the back of the control box. The operator can then rotate the roll manually by turning a handle on the rotational gearbox.
This small format baler is a simple design where product is loaded in top, compression ram presses bale straight out to exit chamber. The exit chamber has a hinged top that is spring loaded, so it can be tighten so I presume either 15kg or possibly 20kg of card board can be baled. It is manually operated with single bags be filled and hand sealed.
Model A1600II S122 has done little work installed July 2014 and taken out into store 2 years later. Was packing animal bedding 20kg Bales 420mm face x 310mm height x 780mm pressed length on 1200 x 1500mm pallets 6 a layer. Circa 3 a minute. Recently robot was repainted see it working in empty factory on video link below.
https://www.dropbox.com/s/nce9w30y1p464tn/Okura%20robot%20video%20VID-20200209-WA0002.mp4?dl=0
Traditional Haylage bale press into bag 15kw Bale pak (circa 1990)
This Bale Pak is an early type where traditional farm small strung bale is taken dropped into top and a 15kw ram presses it across then into a bag. It is taken off hand heat sealed. It comes with accompanying elevator, roller conveyors, small Dawson Keith generator and heat sealer . I have spotted hydraulic level down on gauge and hydraulic ram or seal under header tank needs attention.
Baler capacity: ca 1000 bales / hour.
Bale size: ca. 300 x 120 x 100 mm
Bale weight: 1 kg.
Baler is build up with two pressing systems. (each does 500 bales/hour)
Both pressing systems work independently from each other.
Included 2x pre weighing hopper
Included 2x dosing system (auger with bunker) above each weigh hopper.
Motor power on hydraulic unit: 75 kW
Overall installed E-power: 97 kW
PLC: Siemens
The system includes a bundling system. a conveyor system feeds the bales into the bundling machine. the bundling machine bundles the small bales into packages of 6.
This bundling system has its own control panel and plc.
Overall installed E-power: 4 kW
PLC: Siemens
Bale weight: 1 kg. Bale size: ca. 300 x 120 x 100 mm 1kg Willems baler video . Touch safe link https://www.dropbox.com/sh/ggo6z1odaz9rrey/AAAzQ9sQZCwXkkP5d6JEfBZta?dl=0
700 gram pet bundle is 230 mm face with 2 packs x four packs side to side making 380mm breadth x 290mm high. These were packed on 1000 x 1200 mm pallets 12 bales long x 6 high x 3 bales wide giving 216 bales a pallet. For more pictures email me.
This red and green hammer mill has been pulverising wood chip and making animal bedding. There is no plate on motor but it looks 60kw size, there are 5 vee belts directing the power from motor to mill. Screens are included. It has circa 2000mm x 2000mm x 1500mm foot print.
The H Bohl Type BMK-50 bundle wrapper was manufacture week 38 2003 and runs on 415v 50htz . Machine weight 680 kg. The wrapper has been collating and wrapping small pet packs prior to palletization. It is inline with an Adpak collator.
Tosa heat shrink tunnel Uniblock 915 NF and N (2016)
This heat shrink tunnel is in good condition as it has been used very little. Measuring at 900mm wide x 500mm high tunnel and 1500mm long. 3 phase 50htz. 34 amp
Wood shaving machine made by H. Armstrong Ltd with chain driven log hopper. It comes with a 2200mm x 700mm x 1000mm deep log hopper. It also has a control panel with gantry.
Heat chamber 9’ x 5’ diameter comes with Reillo RL130 diesel burner 2.6kw, digital control, thermocouple control & fire brick heat tunnel, measuring at 2500 x 700 mm diameter
Star universal 101 impulse sack sealer with vacuum 450mm wide (2008)
This white star universal 101 unit was purchased and provides heat into both seal heads. It can also draw a vacuum to make a packet air tight. 240 volt.
This industrial baler has been compressing 350kg of plastic recyclate . A PE bag is attached and strapped to bale. Machine comes with a large belt conveyor. See video https://youtu.be/VIVmITinOqc
Chamber size: Bale size (ave):
Width 108cm 115cm
Depth 59cm 65cm
Height 105cm 105cm
Concetti Low level Palletiser . Can take 1200mm x 1000mm or large pallets 1200 x 1500 (as machine has been modified max height 2200mm). Intake rollers , bag flattened, bag orientation, formation deck, layer hoist , output conveyer. Can do any layer format you like depending on bag size, makes layer then pushes it onto lift deck . Lifts up squashes all bags into place , then opens slide doors to drop the layer onto pallet. Can do a squash downward at each layer also. Light guards included.
This metal frame 1350mm high x 2220 mm holds a 1650 x 760mm over band magnet that was removing metal nails from wood chip. The conveyor carries product forward the over band conveyor with magnets rotates near the wood chip magnetising and removing nails. Type 28108, serial number 28381925, weight 350kg, conveyor speed 0.096 meters a second.
360mm wide x 1560mm long with 220mm deep bed. Spring and morgenson vibratory motor seen in photo was conveying wood chip. The last one I sold had a 2mm screen placed in the top so saw dust screening and conveying took place together.
Model: Minislit MS 3000 Serial Number 6272-2003. Measurements: (Rough): 7.6 M (Length) x 4.2 M (Across) x 4.2 (Height) basically the machine slits and opens sacks of all types, allows product to descend ready for use and sends sacks into screw press where the empty one are pressed and collated. The 2013 sale literature says Minislit operates by feeding the sacks through the large rotating cutting blades mounted on a single shaft that effectively cut the sack into complete hoops in a primary cutting and emptying operation.
Premier tech 4 station baler ( circa 2000) sold for parts or repair
off take conveyor, carousel , 114 inch (2895mm) high boxes and top tubes. Pre compression station. Control cabinet with relays missing and air rams. Hydraulic pack. Automatic bag placing and heat seal station.
Premier tech 4 station baler ( circa 2000) sold for parts or repair
Formerly this 4 station baler packed 20kg of wood shavings on 1200mm x 1500mm pallets 6 a layer x 7 layers so 42 bales equating to 840kg. 5000 bale bags 405mm face x 770mm lay flat tube x 1170mm x 100mu are available for instant sale.
Swift Euro 110 chevron belt elevator 10 x 0.6 metre
Swift Euro 110 rubber chevron belt elevator . Size 10,000mm x 600mm . Driven by 2.2 kw variable speed drive. Machine has wheels and tow bar. Approximate discharge height 4500mm.
2 x 12 tonne cereal internal bins currently used for holding nuts. Size circa 2450 x 2450 x 2930mm . Made up of sections. The base being conical reducing to slide outlet which is fed into conveyor rc431
Chain and flight conveyor with swan neck up lift conveyor
Chain and flight conveyor with swan neck up lift which drops material in to bucket and belt elevator. Casing 290mm height x 340mm wide x 5665mm length includes drive and motor
These 3 tonne bins are set up in series. They have sensors and shoot to allow unloading on to conveyor 350mm wide x 160mm deep . Bin size top 1860 wide and deep down 930 mm remainder of bin conically reducing to shoot. Total height 2300mm.
Alvin Blanch CRX Rice Huller and polisher or seed cleaner (1986)
Alvin Blanch model CX serial number 86 225. Has been polishing and cleaning seed ingredients for a bird feed line. Spare drum with leather beaters in workshop. Contact for more photos and information and parts list.
Alvin Blanch mixing screw with applicator (circa 1990)
This Alvin Blanch mixing screw formerly mixed dog feeds but for the last decade has added molasses to horse feed. The picture is drawing showing screw design
This TA Shore T160 bag weigher has been set up to receive the equine feed coming off the Alvin Blance mixer screw that you can see above. Once bag is weighed and dropped off clamp it is stitched close.
This Medway 150 Stitcher has been closing the animal and Bird feed paper sacks. There are three other similar stitchers weigh and bag clamps to be sold from this factory.
Once the mixed feed has dropped out of auger from rotary blender; this Walthambury bagger series 2000 chevron belt takes up feed to bag head and clamp . The sack is closed by Medway 150 stitcher.
Bird seed mixing line starts with blue bin on weigh scales
Bin Size 340cm length 100cm width and 175cm . Above it a frame which takes up to 3 x 1000kg ingredient bins. Beneath a chain and flight conveyor 500cm including swan neck incline. https://youtu.be/bccE-580O08
This two tonne mixer has been mixing bird seed ingredients. I am advised one man can mix and pack 14 tonne of bird seed in a 8 hour day in paper sacks.
Size Width 1200 x Length 1600 x Height 900 extending to 3710mm lifting a 1000kg . Top has powered conveyor. These lifts were in a computer factory prior to removal .
Robopac Helix HS40 TI automatic spiral stretch wrapper with top sheet applicator (2012)
Robopac Helix HS40 T stroke I, Serial number 101111110366, DOM 2012 type Avvolgitore auto spiral wrapper is a complete line with input and out roller conveyor. Pallet turner and auto labeller. Formatively it was wrapping pallets 1200 x 1000mm to a height 2000mm of drinks in Bradford. My client purchased it to top cover seal and wrap larger animal bedding pallets but got a stretch hooder at same time that he has subsequently fitted. So this carefully taken out line is free to go.
Robopac Helix HS40 TI automatic spiral stretch wrapper with top sheet applicator (2012)
Robopac Helix HS40 was wrapping circa 14 pallets an hour including top sheet. It can work considerably faster than that . Stretch film used were rolls 500mm wide x 250mm with cling on inside. Full technical sheets and manuals available on request. The original fitter of machine has been in touch and would help re commission. Buyer would have to pay for his services.
H Bohl bundle wrapper Type SENIORS S-1400VA (1997)
This H Bohl bundle wrapper CONTROL VOLTAGE 230V-50HZ, 24V OPERATING VOLTAGE 3X 415 V , 50HZ , N , PE . Layout L x B x H. L 3500 MM , W 2500MM , H 2200MM. Machine weight : 2500kg
Twin contra rotating chopping screws (2010) made by Challenger of Hull
Twin contra rotating screws which reduce straw to circa 90mm length are 3380mm long and powered by 2 x 4kw gear boxes. See plan or email me for full size picture.
This MTX straw mixer is of modern design running two slow turning 600mm diameter augers of 15kw each at 30 RPM. This machine was taking sawdust and shavings from a factory. Rough Size 2200mm wide x 5000mm long x 1650mm high.
This MTX mixer 600mm augers seem at the top have had partial flight replacement. No cutter blades have been fitted but were used early when it conveyed at mixed silage, As noted above each 15kw auger rotates at 30 RPM.The base shutter door will open to discharge on completion of mix.
This T2 baler was pressing bales of Peat and Bark in the UK. The baler runs off 1320mm flat coex polythene printed sheeting. It was volumetrically filling 100 litre bales circa 410mm face x 240mm full side gusset bale pressed length 585mm.
Machine footprint is circa 2.5 x 4 x 8 metre high. Machine type 1600P. Video of same series baler pressing 225ltr peat ( this would need new forming shoulder and receiving dolly) https://youtu.be/Sf72MstPCrQ
This Premier tech is similar to demonstration video RC86 at top. The four stations tubes and 200 litre closing boxes are there with carousel bag take off arm and conveyor and bag placer auto placer as photographs.
Serial 9490 DOM 2000 105 amps 400v 50amp 50 htz. The baler has been pressing 200 litres of Irish moss peat in the Republic of Ireland where it is still situated.
This red wooden enormous storage hopper has chain and slat moving floor and was used to fill a baling line. Size 9150mm long. X 2030 mm wide. 2160mm internal height.
This large hopper has chain and flight floor and swan neck trace at discharge end which pulls down shavings to save any blocking. Green hopper is all steel. 11590mm long. 2135mm wide. 2135mm internal height.
Ken Mills Engineering Shredder and baler line (2000)
For sale a complete Ken Mills Engineering Shredder and baler line including KME rotary dust screen, 3 large dust socks and extraction fan. Plant is capable of circa 20,000 card board shredded animal bales per annum.This sale comes from a trusted vender who runs regular maintence.
The Ken Mills shredder is a flat bed with in feed belt which takes the cardboard to the shredding blades. It is longitudinal cut then lateral to give the square absorbent bedding. The product is put through the KME rotary dust screen . The screen is similar to a vacuum cleaner drawing dusty air in via perforated drum on into dust collecting bags, where the clean cardboard bedding once weighed drops to be compression baler to be PE bagged for easy stacking.
This Flygt compact mixer was stirring sewage prior to decommission . Flygt mixer made in Sweden 3 phase 50htz 13KW 400V 44Amp 365 rpm. Flygt Corporation Mixer 4670.410-0670004
BRIK MB 60, MACHINE NO 1562, D.O.M 2009. 36KW 74AMP 380-3 phase 50 HTZ. This 60mm Briquetter has the capacity with dry sawdust to make between 400 to 600 kg of product and hour.
This large belt driven discharge hopper comes with side discharge belt running at the front. Currently sawdust is being taken up by chevron belt conveyor to feed large screw auger that feeds a form fill seal packer.
Bale Pak shaker for screening wood shavings . Size 4000 x 1110mm x 300mm high. Has been screening sawdust off wood shavings. The screen deck vibrated allowing shavings to travel on top whilst saw dust falls through the screen mesh.
This form fill seal comes with 20kg saw dust bag shoot. It can make 600mm lay flat tube, with maximum vertical back seal of 1100mm. The volumetric in feed station is situated above. Small dust extraction as shown in photo. Different forming heads can be brought.Volts 415 KW 8 Hz 50 NI Min 8 to 10. Machine weight 2000kg Video https://youtu.be/Mls6gNiHdJ4
Essegi PC 350 baler form fill seal animal bedding baler (2000)
Essegi Baler PC350 This baler has been compression packing woodshavings into 20kg bales. Line still installed and can be seen running. SEE VIDEO https://youtu.be/0vClF7EaumM
Serial number PC350 - 39/00
Type form Fill seal
400v 60kw 50 hz
Compressed air 8 bar
Lay out 9500 x 3900 x 5000mm
OMRON plc and HMI
bale size 360 x 300 x 790 mm
Stacking pattern 6 x 20kg bales for a 1500 x 1200 pallet
Essegi PC 350 baler form fill seal animal bedding baler (2000)
"
Essegi Baler PC350
Film size 1455mm single would polythene
Bale L = 790
W = 360
H = 300
Gauge 60 micron to 80mu depending on substrate packed.
OMRON plc and HMI